Skip to content
Logo

t > +44 (0)1453 884 908

e > info@newtonsprl.co.uk

News

Banjos

Banjos

Aero

Aero

Aero These superb caps are made by Newton Equipment in London, England to the very highest standards. We developed that contact with special fittings for the aircraft industry to become their largest single market. We supply a large range of N-E caps and are their sole aeronautical distributor but only supply OEM customers direct. The centres are forged from 6063 billet or from 6082 and then polished and anodised. The flanges are diamond turned and again polished and anodised. You can see the range of automotive caps on the Newton Equipment web site. Smaller volumes are available from 'Spruce, Wicks,...
SPRL 65

SPRL 65

SPRL 65 While I was introducing the splendid Aero fuel caps it became clear that there was a demand for a lighter and cheaper assembly so we developed the SPRL series. It is used by most light sport aeroplanes because it is so simple. The range includes the “S” Standard cap and the ” L” lockable version. Flanges available are :- SPRL GS   threaded version, (same thread as the Aero caps) SPRL 65   ‘Universal’ red flange This can be glassed in to a composite skin, or riveted under a metal skin. Note that the edge clearance in a riveted installation...
News

News

News Aero 600 Aero 600 We have created a super light version of the Aero 500, with a smaller footprint but retailing the same 3 inch (77.0mm) filling hole allowing the cap to be used for all fuels. V2 V2 Valve This ON/OFF valve has the same highly desired qualities as other products we offer: a distinctive, positive snap feel and the highest quality possible. There are two entries and one exit which is tapped 1/4 inch NPT for your engine feed. The entry pipes are linked so cross feed will occur in flight and when selected ‘OFF.’ see 'in...
SPRL

SPRL

SPRL Range While I was introducing the splendid Aero fuel caps it became clear that there was a demand for a lighter and cheaper assembly so we developed the SPRL series. It is used by most light sport aeroplanes and because it is so simple we have been able to hold an unchanged price for over ten years. The range includes the “S” Standard cap and the ” L” lockable version. We have two flanges – the “G/S” threaded version, (same thread as the Aero caps) and a ‘universal’ red flange that can be glassed in to a composite skin, or...
News

News

Home

Home

Newton Consulting Newton Consulting are the designers and suppliers of fuel system components to the Aero Industry. Newton Consulting was founded in 1994 when Robin Voice was building an aeroplane which needed fuel caps from Newton Equipment. He developed that contact with special fittings for the aircraft industry to become their largest single market. We supply a range of N-E caps, and make the SPRL™ range of low cost, low weight caps for the lighter aeroplanes. We also have a range of a new family of fuel valves using ceramic disk technology. Our current customers include Cirrus, Diamond,...
Sample Page

Sample Page

This is an example page. It's different from a blog post because it will stay in one place and will show up in your site navigation (in most themes). Most people start with an About page that introduces them to potential site visitors. It might say something like this: Hi there! I'm a bike messenger by day, aspiring actor by night, and this is my website. I live in Los Angeles, have a great dog named Jack, and I like piña coladas. (And gettin' caught in the rain.) ...or something like this: The XYZ Doohickey Company was founded in 1971,...

Rotax

Read More

Installation

Read More

Fittings

Read More

Banjos

Read More

Hello world!

Welcome to WordPress. This is your first post. Edit or delete it, then start writing!

Read More

Newton Consulting